Reference
CTR-001: the first Nintendo 3DS, and how to read its label
CTR-001 is the model number of the very first Nintendo 3DS, the folding handheld that went on sale in Japan on February 26, 2011. Close the console and turn it over: the number is printed on the bottom. On a Japanese unit it reads CTR-001(JPN). The three letters in brackets matter most: they decide which game cards the console will play.
- CTR-001 is the original 3DS. Five later models each have their own number.
- (JPN) means it was made for Japan. It plays Japanese 3DS game cards only.
- The charger is the WAP-002(JPN). Nintendo tells owners to use it only on Japan's 100V supply.
Where the number is, and what the brackets mean
The model number sits on the bottom of the console. The letters before the dash name the model. The letters in brackets at the end name the market the console was made for. Nintendo's own booklets show both parts: the Japanese 3DS manual lists the console as CTR-001(JPN), and a British booklet for the 3DS XL lists the European one as SPR-001(EUR).
Nintendo has not officially explained what the letters CTR stand for.
All six 3DS model numbers
The family grew to six machines. In Japan the large models were called LL. In North America and Europe the same machines were called XL.
| Model number | Name in Japan | Name in North America and Europe | On sale in Japan from | How to spot it |
|---|---|---|---|---|
| CTR-001 | Nintendo 3DS | Nintendo 3DS | February 26, 2011 | The first one. It folds, and its top screen is 3.53 inches across. |
| SPR-001 | Nintendo 3DS LL | Nintendo 3DS XL | July 28, 2012 | The same machine made bigger, with larger screens. |
| FTR-001 | Nintendo 2DS | Nintendo 2DS | February 27, 2016 (sold abroad from October 12, 2013) | One flat piece that does not fold, and no 3D picture. |
| KTR-001 | New Nintendo 3DS | New Nintendo 3DS | October 11, 2014 | Small size. A tiny extra stick (the C-stick) above the A, B, X and Y buttons, and two extra shoulder buttons, ZL and ZR. |
| RED-001 | New Nintendo 3DS LL | New Nintendo 3DS XL | October 11, 2014 | The large New model, with the C-stick, ZL and ZR. |
| JAN-001 | New Nintendo 2DS LL | New Nintendo 2DS XL | July 13, 2017 | Folds like a 3DS but shows no 3D picture. Has the C-stick, ZL and ZR. |
If the label is worn away, the buttons narrow it down. A C-stick and ZL and ZR buttons mean one of the three New models. A console that does not fold at all is the 2DS.
A Japanese 3DS plays only Japanese 3DS games
In our translation, Nintendo's Japanese manual says: "Only software made for Japan can be used. Software made for overseas cannot be used." Nintendo confirmed in January 2011, before the first 3DS reached Japanese shops, that 3DS software is tied to the region of the console.
So a 3DS game card bought in America or Europe will not start on a CTR-001(JPN), and a Japanese card will not start on an American or European 3DS. The same goes for every model in the table: each one was sold in versions for different regions.
The manual does not say whether this also covers older Nintendo DS cards, which the 3DS can play too. Some players report that original DS cards, which had no region lock on the DS itself, do start on a Japanese 3DS, and that some cards made for the DSi are locked to their region. We have not tested this ourselves, so check the particular game before you count on it.
For home consoles, our table of which Japanese systems start American games covers eight machines side by side.
The charger: WAP-002, and the warning in the Japanese manual
When the first 3DS went on sale in Japan in 2011, the box held the console CTR-001(JPN), a charging cradle (CTR-007), the AC adapter WAP-002(JPN) and a stylus (CTR-004), along with an SD card, AR cards and printed guides. The later Japanese boxes for the 3DS LL, New 3DS, New 3DS LL and New 2DS LL came without the adapter. Nintendo sold it separately.
The spec page of the Japanese manual gives the adapter as AC 100–120V 50/60Hz 12VA in and DC 4.6V 900mA out. The safety pages of the same manual are stricter. They tell owners not to use it on anything other than Japan's 100V household supply, and not to use it with an overseas travel transformer.
The British version, the WAP-002(UKV), is labelled AC 220–240V 50/60Hz in and DC 4.6V 900mA out. The name and the output are the same as the Japanese one. Only the input voltage is different. From these two labels, we take this to mean that a WAP-002 sold in your country gives the console the same power. Nintendo does not say so itself: its Japanese manual lists only Japanese products as compatible.
The Japanese adapter is rated for 100–120V only, so do not use it on a 220–240V supply.
If you already own a Nintendo DSi, you know this charger: the Japanese manual lists the DSi and DSi LL among the machines the WAP-002(JPN) is made for. Our voltage page suggests a step-down transformer for Japanese home consoles, but this charger is different: Nintendo's manual says not to use one with it.
Common questions
- What is CTR-001?
- CTR-001 is the model number of the first Nintendo 3DS, the folding handheld that went on sale in Japan on February 26, 2011. A Japanese unit is labelled CTR-001(JPN). The later models have their own numbers: SPR-001 is the 3DS XL (called 3DS LL in Japan), FTR-001 the 2DS, KTR-001 the New 3DS, RED-001 the New 3DS XL and JAN-001 the New 2DS XL.
- Will a Japanese CTR-001 play American or European 3DS games?
- No. Nintendo's Japanese manual says that only software made for Japan can be used, and that software made for overseas cannot. A 3DS game card from America or Europe will not start on a Japanese 3DS.
- What charger does a Japanese CTR-001 use?
- The WAP-002(JPN). Its label reads AC 100–120V 50/60Hz 12VA in and DC 4.6V 900mA out. Nintendo's Japanese manual still tells owners to use it only on Japan's 100V household supply, and not with an overseas travel transformer.