Reference

Can You Plug a Japanese Console In Where You Live?

Not straight into the wall. Most of the Japanese power supplies on this page are made for Japan's 100 volts (for the PC Engine and PlayStation 2 we could not confirm the rating), and every country in the table below runs higher: about 120V in North America, and 220V to 240V in the UK, Europe, Australia and Hong Kong.

There are two safe ways to run one. Keep the Japanese supply and plug it into a step-down transformer, a box that takes your mains and gives out 100V. Or set the Japanese supply aside and use a replacement made for your mains that gives the console exactly what the original did.

A few words first

Mains is the electricity that comes out of your wall socket. AC is the kind of power in the wall; DC is the steady kind a console runs on, and a power supply turns one into the other. Polarity is which part of the plug is plus and which is minus; it is shown by a small symbol printed on the supply. Codes such as HVC-002 are the model numbers printed on each power supply's label. "Not confirmed" in the tables means our sources did not say. It does not mean no.

Find your country

Country Wall voltage Frequency Wall socket types For a Japanese 100V power supply
United States 120V 60Hz A, B Higher than the 100V the Japanese supply is made for. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Canada 120V 60Hz A, B Higher than the 100V the Japanese supply is made for. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Mexico 120V and 127V (both in use) 60Hz A, B Higher than the 100V the Japanese supply is made for. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Brazil 127V and 220V (both in use) 60Hz C, N Find out which voltage your socket gives. Both are higher than 100V: use a step-down transformer to 100V, or a replacement supply made for your mains.
United Kingdom 230V 50Hz G More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Germany 230V 50Hz C, F More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
France 230V 50Hz C, E More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Italy 230V 50Hz C, F, L More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Spain 230V 50Hz C, F More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Netherlands 230V 50Hz C, F More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Australia 230V (240V in Western Australia) 50Hz I More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.
Hong Kong 220V 50Hz G (D and M also found) More than twice what the Japanese supply is made for. Never plug it straight in. Use a step-down transformer to 100V, or a replacement supply made for your mains.

The socket letters are the international names for wall socket shapes. A plug adapter only changes the shape of the plug; it does nothing to the voltage.

Console by console

Every console has the same two choices: a transformer or a replacement supply. What changes from row to row is the supply each console came with, and what a replacement has to match.

Japanese console Its Japanese power supply With a step-down transformer With a replacement supply Watch out
Famicom HVC-002: 100V AC in (50 or 60Hz), 10V DC out at 850mA (0.85A). The same supply as the Super Famicom. Works with the original supply. It must give 10V DC and at least 850mA. Our sources do not confirm the polarity of the plug, so match the polarity symbol on the original before you switch on. Do not use an American NES adapter. Collectors report that it gives out AC, while the Famicom is built for 10V DC.
Super Famicom The same HVC-002 as the Famicom: 100V AC in, 10V DC out at 850mA. Works with the original supply. The same as the Famicom: 10V DC and at least 850mA, with the polarity matched to the original. No extra warning found for this console.
Nintendo 64 NUS-002: 100V in (50 or 60Hz), two outputs of 3.3V and 12V. It is a separate block that plugs into the back of the console. Works with the original supply. Replacement blocks rated for 100–245V are made, so one block can run on your mains directly. Do not plug the Japanese 100V block into a 230V wall.
GameCube DOL-002: made for Japan's 100V. It gives the console 12V DC, up to 3.25A. Works with the original supply. It must give 12V DC and at least 3.25A, which is what the console asks for. No extra warning found for this console.
PC Engine Not confirmed. Read the label on your supply. If it says 100V, a transformer is the answer. Not confirmed. Read the output printed on the original supply, and match its volts, amps and polarity. No extra warning found for this console.
Mega Drive Mega Drive 2: SA-190, 100V in, 10V DC out. The supply for the first Mega Drive: not confirmed. Works with the original supply. For the Mega Drive 2, it must give 10V DC. The supply for the first Mega Drive and the supply for the Mega Drive 2 are not interchangeable.
Sega Saturn A 100V AC supply of about 15 watts came with the console. Our sources do not say whether it sits inside the console or outside. Works with the original supply. Not confirmed. Read the output printed on the original supply, and match its volts, amps and polarity. No extra warning found for this console.
PlayStation 2 Not confirmed. Some PS2 models carry the supply inside the console and some outside. Until you can read 100–240V on the label yourself, treat it as a 100V machine and use a transformer. Not confirmed. Read the output printed on the original supply, and match its volts, amps and polarity. Do not plug it straight into a 230V wall on a guess.

Transformer or replacement: how to choose

A step-down transformer lets you keep the console exactly as it came from Japan. Choose one that turns your mains down to 100V, and check that its rating covers the wattage printed on the console's power supply. If the label shows only the output, choose a larger transformer.

With a replacement supply you need no transformer, but it has to match the original's output: the same voltage, at least the same current, a plug that fits the console, and the same polarity. Where a row above says "not confirmed", read the label on the console and on its original supply before buying either.

Common questions

Can I plug a Japanese console straight into an American outlet?
Not as it was made. Most power supplies sold with Japanese consoles are built for Japan's 100V, and an American outlet gives 120V, which is above that. The two safe choices are a step-down transformer that turns your 120V into 100V, or a replacement power supply made for 120V that gives the console the same output as the original.
Do I need a transformer for a Japanese console in the UK, Europe or Australia?
If you keep the Japanese power supply, yes. Mains in the UK, Europe, Australia and Hong Kong is 220V to 240V, more than twice what the Japanese supply is made for, so never plug it straight in. The other choice is to set the Japanese supply aside and use a replacement made for your mains that gives the console the same output.
Will a plug adapter do?
No. A plug adapter only changes the shape of the plug so it fits your wall. It does nothing to the voltage, so a 100V supply on a plug adapter still receives your full mains voltage.
Can I use an American NES adapter on a Famicom?
No. Collectors report that the American NES adapter gives out AC, while the Famicom is built for 10V DC from its own HVC-002 supply. Do not use it.
Does it matter that my mains is 50Hz or 60Hz?
Japan itself uses both, and the original Famicom, Super Famicom and Nintendo 64 supplies are rated for 50 and 60Hz. For the other consoles on this page, our sources do not state the rating.

Related

This museum is run by Enjoy Game Japan, a retro game shop in Japan.