Reference
Will American Games Work on a Japanese Console?
It depends on the machine, and the answer falls into three groups. On the Famicom, Super Famicom and Nintendo 64, an American cartridge is stopped by its shape: get it into the slot with an adapter, and the game starts. The Mega Drive belongs here too: the first Japanese model blocks American cartridges, the Mega Drive 2 takes them as they are, and some games check the region and stop. On the PC Engine, the American card sends its data in the opposite order and most American games also check the region, so it needs a converter that does more than change the shape. The GameCube, Sega Saturn and PlayStation 2 accept the disc and then refuse it, because the console itself checks the region; those need a boot disc, a converter cartridge or a modification.
It is the question we hear most often from people about to buy a Japanese machine, so the whole answer is in one table below. European games are a separate case on almost every system.
System by system
A few words used below: a lockout chip is a small chip in the console and the cartridge that must match before a game starts. A pass-through adapter plugs into the slot and takes the other cartridge on top. A modchip is a chip fitted inside the console, and a boot disc or swap disc is a disc you start first so the console accepts a disc from another region.
| Japanese console | American games on it | European games on it | Japanese games on an American or European console | Read more |
|---|---|---|---|---|
| Famicom | Does not fit: an American NES cartridge has 72 pins, the Famicom slot takes 60. Through a 72-to-60-pin adapter it runs, because the Famicom has no lockout chip. | Same 72-pin cartridge as the American one, so it needs the same adapter. We could not confirm how each European game behaves once connected. | A Famicom cartridge needs a 60-to-72-pin adapter on an NES. The NES also has a lockout chip the Famicom cartridge lacks; older adapters got past it by freezing that chip. | Famicom vs NES |
| Super Famicom | Does not fit: the American cartridge is a different shape. Through a pass-through adapter it runs, because Japan and North America use the same lockout chip. | Fits, because the European cartridge is the same shape, but does not start: the European machine uses a different lockout chip. A converter or a modification is needed. | Two plastic tabs in the American slot block it; with an adapter, or with the tabs removed, it runs. In a European SNES it fits but does not start. | Super Famicom vs SNES |
| Nintendo 64 | Blocked by a plastic tab in the slot that meets a different notch on the back of the cartridge. Through a pass-through adapter, or with the tab removed, it runs. | Does not run, even once it fits: European cartridges carry a different lockout chip from Japanese and American ones. | The same tab stops it on an American N64, and the same fix works. On a European N64 it does not run. | The N64 section below |
| GameCube | The disc goes in; the console refuses it. The check is in the console itself, so it takes a boot disc or a console modification. | Refused in the same way. | Refused in the same way on American and European consoles. | GameCube region lock |
| PC Engine (HuCard) | Does not run: the American TurboGrafx-16 card sends its data to the console in the opposite order, and nearly every American game also checks the region. It needs a converter that puts the data back in the right order. | Not covered here. | A Japanese HuCard on a TurboGrafx-16 needs a converter that puts the data back in the right order. | PC Engine vs TurboGrafx-16 |
| Mega Drive | The first Japanese Mega Drive has a plastic locking piece that stops an American cartridge. The Mega Drive 2 (1993) takes it. Once in, most games run; some check the region and stop. | Same shape as an American cartridge: blocked by the first Japanese Mega Drive, fits the Mega Drive 2. Some games check the region and stop; we could not confirm how the others behave. | A Japanese cartridge does not fit the American Genesis or the European Mega Drive slot. It needs a converter, and a game that checks the region can still stop. | Mega Drive vs Genesis |
| Sega Saturn | The disc goes in; the console refuses it. A converter cartridge in the top slot or an internal switch gets past the check. Neither translates the game. | Refused in the same way. | Refused in the same way on American and European consoles. | Sega Saturn region lock |
| PlayStation 2 | The disc goes in; the console refuses it. The PS2 is locked to three regions: Japan, North America and Europe. It takes a modchip or a swap disc. | Refused in the same way. | Refused in the same way. DVD films are region-locked on the PS2 too. | PS2 region lockJapanese PS2 model numbers |
The CD side of the PC Engine (CD-ROM²) is not covered here; we could not confirm how its discs behave across regions.
Nintendo 64: between Japan and America, only a plastic tab
The Nintendo 64 kept one name and one design worldwide, and Nintendo put the regional lock into the shape of the cartridge. Each region's cartridge has its own notches on the back, and a plastic tab in the console's slot meets those notches. A Japanese N64 turns away an American cartridge at the slot, and an American N64 does the same to a Japanese one.
Between Japan and North America, that tab is the whole difference. A pass-through adapter, which takes the cartridge on top and plugs into the slot underneath, gets past it; so does a console with the tab removed. Once the cartridge is connected, the game runs.
European cartridges are another matter. Cartridges made for Japan and North America share one family of lockout chips; European cartridges carry another, and each console refuses the other. A European game does not run on a Japanese or American N64, and a Japanese game does not run on a European one, even when the cartridge is made to fit.
Common questions
- Can a Japanese console play American games?
- It depends on the machine. On the Famicom, Super Famicom and Nintendo 64, the American cartridge is stopped by its shape, and through an adapter it runs. The Mega Drive 2 takes American cartridges, though some games check the region. The PC Engine needs a converter that puts the data on the card back in the right order. The GameCube, Sega Saturn and PlayStation 2 refuse discs from other regions until the console is modified or a boot disc or converter cartridge is used.
- Can a Japanese Nintendo 64 play American games?
- Yes, once the cartridge fits. Japanese and American N64 cartridges have different notches on the back, and a plastic tab in the slot uses them to block the other region. A pass-through adapter, or removing the tab, lets an American game run on a Japanese N64. European cartridges are different: they carry another lockout chip and do not run on a Japanese or American console.
- Will a Japanese PS2 play American discs?
- Not as it comes. The PlayStation 2 is region-locked to Japan, North America and Europe, and a Japanese console refuses discs from the other two. It takes a modchip or a swap disc. DVD films are region-locked as well.
- Do Japanese games work on an American console?
- The same locks apply in reverse. A Famicom cartridge needs an adapter on an NES; a Super Famicom or Nintendo 64 cartridge needs an adapter, or the slot tabs removed, on an American console; a Japanese Mega Drive cartridge needs a converter on a Genesis. American GameCube, Saturn and PS2 consoles refuse Japanese discs until they are modified or a boot disc or converter cartridge is used.