Family Computer (Famicom) / NES · Vertically scrolling shooter

Image Fight

イメージファイト

Japan: March 16, 1990 · Dev: Irem

Irem's demanding vertical shooter on Famicom. Fail a training mission and face a penalty stage. No casual play here.

Image Fight was developed by Irem and released for Famicom in March 1990 — a port of Irem's 1988 arcade vertical shooter. Players faced an initial training mission that needed to be cleared above a minimum score threshold; failure sent them to a penalty stage before the main game. The game featured a pod system similar to R-Type: attachable units that modified the ship's firepower. Image Fight's strict difficulty became notable in gaming culture. The Famicom version sold approximately 200,000 copies.

About this game

Image Fight began as Irem's 1988 arcade shooter and reached the Famicom in 1990. The game is known for its demanding difficulty and its 'pod' weapon options that orbit the player's fighter, as well as a penalty stage that forces under-performing pilots to repeat earlier sections. It stands as one of Irem's signature vertical shooters from the era that produced R-Type.

Collector's Guide

Japan Release March 16, 1990

Region & Compatibility

Famicom and NES are the same hardware family but use physically incompatible cartridge formats — Famicom carts have a 60-pin connector and a narrower shell, while NES carts use a 72-pin connector with a wider housing. You cannot insert a Famicom cartridge into a North American NES slot without an adapter, and vice versa. The Famicom itself has no lockout chip, so any Famicom cartridge from Japan will run on a Famicom console regardless of origin. If you are buying a Japanese Famicom cart to play on a NES, you will need a 60-to-72-pin physical adapter; if you own a Famicom, Japanese-market software is your native format and no workarounds are needed.

Maintenance Tips

The gold-plated edge connectors on Famicom and NES cartridges pick up skin oils and oxidation over decades — a gentle wipe with a cotton swab dampened in 90% or higher isopropyl alcohol, stroking along the length of the pins rather than across them, is the accepted standard. Let the alcohol fully evaporate before reinserting. The old habit of blowing into a cartridge is folklore: the moisture in breath causes slow corrosion of the contacts over time, and any improvement you felt came from the act of re-seating the cart, not from the breath itself. Nintendo eventually updated its own troubleshooting guidance to say explicitly: do not blow into your Game Paks.

What to Watch Out For

Before buying, these are the points worth knowing — from someone who handles original Japanese Image Fight copies regularly.

Will this Japanese Famicom cartridge work on a North American Nintendo Entertainment System (NES)?

No, not without an adapter. The Famicom uses a 60-pin edge connector while the NES uses a 72-pin connector with a physically different form factor — the two are incompatible at the cartridge slot level. Third-party adapters exist that bridge the pin difference and allow Famicom cartridges to run in a NES. On a Japanese Famicom, NES cartridges face the same incompatibility in reverse. To play Japanese Famicom software, you need a Japanese Famicom, a Famicom-compatible clone console, or a NES fitted with an appropriate adapter.

How should I clean a Famicom cartridge to ensure reliable play?

Apply 90% or higher isopropyl alcohol to a cotton swab and gently wipe the gold-plated PCB edge contacts on the base of the cartridge. Never blow into the cartridge — breath moisture accelerates contact corrosion over time. If cleaning is needed inside, Famicom cartridges use 3.8mm security game bit screws (not standard Phillips); a security bit screwdriver is required to open the shell without damage. Note that most Famicom boot failures originate in the 60-pin console slot rather than the cartridge itself — cleaning the console slot contacts separately with a contact cleaning tool is often the more effective fix.

Before You Buy

Things worth knowing before you buy Image Fight

A short checklist for buying a used Famicom cartridge wisely — useful with any seller, anywhere.

  1. Choose a seller who tests it before shipping

    A copy that has actually been powered on and checked is a known quantity. An untested one is a gamble you only settle after it arrives.

    Look for a seller who states it was function-tested and says what they confirmed. A serious seller can tell you exactly what was checked.

  2. Make sure it fits your console

    This is a Japanese Famicom cartridge with a 60-pin connector; a North American NES uses a 72-pin slot, so it will not fit directly.

    Play it on a matching Japanese console or a region-free system, and confirm the listing states the region.

  3. If this title saves your progress, check the battery

    Cartridges that save use a small coin-cell battery that fades over decades — a dead one wipes your save without warning.

    Ask the seller whether the save function was tested. Replacing the battery is possible, but doing so erases any existing save.

  4. Check that the contacts are clean

    Dirty edge contacts are the most common cause of startup and sound trouble in cartridges of this age.

    Choose a seller who cleans the contacts before shipping. A note that it was tested and cleaned means the basics were handled.

  5. Confirm it is genuine, not a reproduction

    Sought-after titles are targets for reproduction boards with replacement labels.

    Ask for a photo of the circuit board and look for factory markings. Favour a shop with a licensed second-hand dealer permit (古物商) — by law its stock has a traceable origin, your simplest guard against fakes.

  6. Read the seller's reviews and return policy

    A 100% positive record across thousands of sales is close to a guarantee — packing, communication and problem-solving all work for everyone. A return policy protects you if something is off.

    Read the feedback and confirm a clear return window before you buy.

Unexpected Discoveries

Games you weren't looking for — but might be glad you found.

Share your memory

No account needed. Just your nickname and your words. Your memory goes straight to Taisei — the person who cleaned, tested, and packed these consoles in Toyohashi. He reads every one, in any language.

Choose a prompt to start writing:

Memories
Strength for Tomorrow

(Select a prompt above, or write freely below)

Any name you like. No registration needed.

Write in any language. Maximum 2,000 characters.

Just a nickname and your words — no account, no login. Taisei reads every memory before it appears here, so it may take a little while to show up. See our Privacy Policy.

Prefer to write to Taisei privately? Email him directly →

Memories from around the world

This is a young museum, and this page is still waiting for its first voices. The memories people send reach Taisei personally, and the ones that move him find a home here over time — always with the writer's blessing. Yours could be the very first for this game.

Share your memory ↑